Install Modem Smart di OpenSuse 11.4

 

Pada tutorial ini desktop yang saya gunakan adalah desktop KDE, wvdial dan nano sudah terinstall, apabila belum terinstall maka install dulu lewat YAST atau Zypper. Modem Smartfren Huawei EC 1260-2 ini di dukung pada OpenSuse 11.4 tidak perlu install driver lagi. Berikut langkah-langkahnya:

1. Colokin modemnya
2. Buka terminal
3. sudo wvdialconf
4. Masukin password root

patenpisan@linux-qnmb:~> sudo wvdialconf

Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud

ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud

ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.

Modem Port Scan<*1>: S1 S2 S3 S4 S5 S6 S7 S8

Modem Port Scan<*1>: S9 S10 S11 S12 S13 S14 S15 S16

Modem Port Scan<*1>: S17 S18 S19 S20 S21 S22 S23 S24

Modem Port Scan<*1>: S25 S26 S27 S28 S29 S30 S31

WvModem<*1>: Cannot get information for serial port.

ttyUSB0<*1>: ATQ0 V1 E1 -- OK

ttyUSB0<*1>: ATQ0 V1 E1 Z -- OK

ttyUSB0<*1>: ATQ0 V1 E1 S0=0 -- OK

ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK

ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK

ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

ttyUSB0<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: HUAWEI TECHNOLOGIES CO., LTD

ttyUSB0<*1>: Speed 9600: AT -- OK

ttyUSB0<*1>: Max speed is 9600; that should be safe.

ttyUSB0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

WvModem<*1>: Cannot get information for serial port.

ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud

ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud

ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.

WvModem<*1>: Cannot get information for serial port.

ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud

ttyUSB2<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud

and failed too at 115200, giving up.

WvModem<*1>: Cannot get information for serial port.

ttyUSB3<*1>: ATQ0 V1 E1 -- OK

ttyUSB3<*1>: ATQ0 V1 E1 Z -- OK

ttyUSB3<*1>: ATQ0 V1 E1 S0=0 -- OK

ttyUSB3<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK

ttyUSB3<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK

ttyUSB3<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

ttyUSB3<*1>: Modem Identifier: ATI -- Manufacturer: +GMI: HUAWEI TECHNOLOGIES CO., LTD

ttyUSB3<*1>: Speed 9600: AT -- OK

ttyUSB3<*1>: Max speed is 9600; that should be safe.

ttyUSB3<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found a modem on /dev/ttyUSB0.

Modem configuration written to /etc/wvdial.conf.

ttyUSB0<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

ttyUSB3<Info>: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"

5. Edit settingan wvdial.conf anda sesuai dengan operator yang anda gunakan

sudo nano /etc/wvdial.conf

Kalau udah selesai simpan dengan perintah Ctrl + O, untuk keluar Ctrl + X

6. Berikut settingan wvdial.conf dengan operator mobi (smartfren)

[Dialer Defaults]

Init1 = ATZ

Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

Modem = /dev/ttyUSB0

Phone = #777

Idle Seconds = 300

Modem Type = USB Modem

Stupid Mode = 1

Compuserve = 0

Baud = 460800

Auto DNS = 1

Dial Command = ATDT

Ask Password = 0

ISDN = 0

Password = m8

Username = m8

7. Untuk menyambungkan pake perintah sudo wvdial

patenpisan@linux-qnmb:~> sudo wvdial

--> WvDial: Internet dialer version 1.60

--> Cannot get information for serial port.

--> Initializing modem.

--> Sending: ATZ

ATZ

OK

--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0

OK

--> Modem initialized.

--> Idle Seconds = 300, disabling automatic reconnect.

--> Sending: ATDT#777

--> Waiting for carrier.

ATDT#777

CONNECT

--> Carrier detected. Starting PPP immediately.

--> Starting pppd at Thu Sep 1 14:54:42 2011

--> Pid of pppd: 2177

--> Using interface ppp0

--> local IP address 10.184.96.175

--> remote IP address 10.17.95.3

--> primary DNS address 10.17.3.244

--> secondary DNS address 10.17.3.252

--> Script /etc/ppp/ip-up run successful

--> Default route Ok.

--> Nameserver (DNS) Ok.

--> Connected... Press Ctrl-C to disconnect

8. Selama internetan terminal jangan ditutup, apabila pengen disconnect tekan Ctrl - C

 

sumber : http://bloglinux-patenpisan.blogspot.com/2011/09/opensuse-114-setting-modem-smartfren.html